
Wood Deck Care: How to Clean, Repair and Restain It Right
To care for a wood deck, repair it first, then clean it, let it dry, and restain. Fix loose posts, rusty screws and soft boards before any coating goes on. Clean with a wood deck cleaner and a brush, not a hard spray. Restain when water soaks in instead of beading up.
This guide is for homeowners in Wentzville and nearby towns. If the deck is past saving, see our wood deck and composite deck pages.
Step 1: Check what needs repair
Repairs come first, because stain won't hold on rotten or loose wood. Walk the deck and check:
- Railing posts. If a post wobbles, the bolts or blocking need work.
- Screws and nails. Replace rusty or popped fasteners with coated or stainless ones.
- Boards. Soft, rotten or badly split boards should be replaced now so the color matches later.
- Stairs. Check the stringers and treads, and sand any splinters.
- Where the deck meets the house. Stains or soft wood here mean water may be getting behind the ledger board. Call a pro for that one.
Step 2: Clean it the right way
Use a cleaner made for decks and a brush, and keep a pressure washer gentle. A hard spray can tear up the soft wood and make the stain go on blotchy.
For a wood deck:
- Sweep off leaves and dirt.
- Wash with a wood deck cleaner and scrub with the grain.
- If the wood still looks dark, use a wood brightener.
- Rinse well.
- Let it dry for a day or two of dry weather before staining.
For a composite deck:
- Blow or sweep out the gaps between boards.
- Wash with a cleaner the deck maker approves and a soft brush.
- Rinse well so no soapy film is left.
- Check the maker's care guide before you use a pressure washer. Some void the warranty if you do it wrong.
Step 3: Pick a stain and know when to redo it
Water is your test. If it beads up, the finish is still working. If it soaks in, it's time to recoat.
| Finish | Looks | Upkeep |
|---|---|---|
| Clear or see-through stain | Shows the wood grain | Recoat more often, sooner on sunny decks |
| Solid stain | Covers like paint, hides mixed boards | Lasts longer on color, but must be prepped well or it peels |
| Composite (no stain) | Color is built in | Just clean it. Cleaning won't undo sun fading |
To switch from a solid stain to a see-through one, the old solid stain has to come all the way off first.
Step 4: Stain in the right weather
Stain on a dry day in the shade, within the temperatures on the can. Hot boards dry too fast and streak. Cold or damp days slow drying. Wait the full time the can says before the second coat, and before putting rugs, grills or heavy pots back.
A simple deck care calendar
- Spring: Deep clean and check for repairs.
- Summer: Spot clean busy and shady areas so they don't get slick.
- Fall: Wash off leaves. Do the water test and recoat if needed.
- Winter: Shovel with a plastic shovel. Don't chip ice with metal tools.
FAQ
Do I need to sand before every restain? Not always. If the old stain soaked in and isn't peeling, clean it and recoat. If it's peeling, it needs to be stripped or sanded.
Will cleaning bring back a faded composite deck? No. Cleaning removes dirt and mildew, but it won't undo sun fading.
Should I put a rubber-backed rug on my deck? No. It traps water and can mark the finish. Use a rug that lets air through.
When should I call a pro? When posts wobble, the ledger looks wet, the deck is high off the ground, or a solid stain is peeling badly.
Need a hand with your deck?
JT's Painting & Renovations repairs and builds decks in Wentzville and nearby towns. See our wood deck work or ask for a free estimate.










